Setup

NOTE: The installation commands below refer specifically to Debian/Ubuntu Linux. Equivalent commands are available for other distributions of Linux.

• Build tools and libs

sudo apt-get install build-essential libgtk2.0-dev libssl-dev xsltproc ia32-libs libxml2-dev

• Install Python v2.6/2.7 (Python v3.0 is not compatible and will cause errors)

sudo apt-get install python

• Installl SCons v2.0.

sudo apt-get install scons

• Get AllJoyn™ source
  • Download the source zip and extract Core source into $AJ_ROOT/core/ajtcl/ and Base Services source into $AJ_ROOT/services/base_tcl/
  • Alternatively, use git:

    $ cd $AJ_ROOT
    $ mkdir core/
    $ cd core
    $ git clone https://git.allseenalliance.org/gerrit/core/ajtcl.git 
    $
    $ cd $AJ_ROOT
    $ mkdir services/
    $ cd services
    $ git clone https://git.allseenalliance.org/gerrit/services/base_tcl.git
    

Building

Building Core:

$ cd $AJ_ROOT/core/ajtcl/
$ scons WS=off

Binaries for samples are located at $AJ_ROOT/core/ajtcl/dist/bin/

Building Base Services:

$ cd $AJ_ROOT/services/base_tcl/
$ scons WS=off

Binaries for service samples are located at $AJ_ROOT/services/base_tcl/dist/bin/

Add the AllJoyn framework to an application

See the Build an Application using the Thin Library section for instructions.